Vapor Polishing is a fast, effective way to achieve a polished, smooth finish for your machined plastic parts. Consistent, uniform results with significantly reduced processing times from hours to minutes.
REMOVING ABRASIVE FROM BADGES
Difficulty removing polishing abrasive with wiping because of the deep groves in the badge. AeroTron™ in the ULTRA™ vapor degreaser equipped with ultrasonics removed abrasive quickly and completely.
VAPOR CLEANING HOLLOW STEEL TUBE
The ability to clean both the interior and exterior of a part is one of the benefits of vapor degreasing. AeroTron™ in the ULTRA™ vapor degreaser completely cleaned tube in a matter of minutes...both the interior and exterior. The part is completely clean and dry - at the end of the cleaning process.
COMPREHENSIVE CLEANING OF THOUSANDS OF PARTS AT THE SAME TIME
Cleanliness problems were an issue with thousands of parts needing to be cleaned at the same time. AeroTron™ in the ULTRA™ vapor degreaser equipped with ultrasonics completely cleaned the parts in a matter of minutes. The parts, at the end of the 2 minute cycle, are completely clean and dry - ready for the next manufacturing stage.
REMOVAL OF WAX FROM GLASS
Wax is a difficult to remove from any surface - especially glass. Vapor degreasing and vapor cleaning easily takes the wax into solution and removes it from the surface of the glass - leaving the glass residue free and completely clean.
AeroTron™ can be used to dissolve tar & bitumen from shingles and other asphalt substrates quickly. AeroTron™ is used by DOTs instead of nPB & TCE.